File APIs for Java Developers
Manipulate DOC, XLS, PPT, PDF and many others from your application.
  • Post Reply
  • Bookmark Topic Watch Topic
  • New Topic

Tomcat + Apache configuration servlet access problem

Jose Mech
Posts: 3
  • 0
  • Mark post as helpful
  • send pies
  • Quote
  • Report post to moderator

I am trying to configure tomcat 4.1.29 with Apache web server I have configured every thing based on the documentation given in the site and I could able to see initial static page, but when I try to connect to servlet from apache it is not connecting, I have configured my servlet in the web.xml as follows and calling the servlet as /controller.


How can I specify controller in the Apache httpd.conf file.

I also have one more question, I have one html files folder in tomcat, is it possible to move the folder and images folder to apache server. if so can you please tell me how to configure that also in the httpd.conf file.

I tried to set some alias names, but it did not work out.

Thanks in advance.

Scott Dunbar
Ranch Hand
Posts: 245
  • 0
  • Mark post as helpful
  • send pies
  • Quote
  • Report post to moderator
Have you first verified that your servlet works through Tomcat only? I find that it is easier to verify that first, before going through Apache.

After you have that working you'll want to add:

in your configuration. If you're using virtual hosts then just put this within the VirtualHost stanza.
Jose Mech
Posts: 3
  • 0
  • Mark post as helpful
  • send pies
  • Quote
  • Report post to moderator

Thanks for your reply. Yes the servlet is working fine in tomcat, infact the application is in production with only Tomcat server, now we would like to connect Apache server.

I added the following line in the httpd.conf file, but still shows page can not be displayed error.

JkMount /controller/* ajp13

Thanks & Regards,


Here are my config files


<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->

<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.

Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.

<Server port="8005" shutdown="SHUTDOWN" debug="0">

<!-- Uncomment these entries to enable JMX MBeans support -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"

<!-- Global JNDI resources -->

<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
description="User database that can be updated and saved">
<ResourceParams name="UserDatabase">


<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.

Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.

<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Tomcat-Standalone">

<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.

By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 4.0 documentation bundle for more detailed
* Download and install JSSE 1.0.2 or later, and put the JAR files
into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.

By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.

<!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8081 -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="150"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to -1 -->

<!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8443" minProcessors="5" maxProcessors="75"
acceptCount="100" debug="0" scheme="https" secure="true"
useURIValidationHack="false" disableUploadTimeout="true">
<Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
clientAuth="false" protocol="TLS" />

<!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="20000"

<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="8009" minProcessors="5" maxProcessors="75"
acceptCount="10" debug="0"/>

<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8082" minProcessors="5" maxProcessors="75"
enableLookups="true" disableUploadTimeout="true"
acceptCount="100" debug="0" connectionTimeout="20000"
proxyPort="80" useURIValidationHack="false" />

<!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8083" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" />

<!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
<Connector className="org.apache.catalina.connector.http10.HttpConnector"
port="8084" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" />

<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->

<!-- Define the top level container in our container hierarchy -->
<Engine name="Standalone" defaultHost="mysgflow" debug="0">

<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.

For a similar mechanism that is portable to all Servlet 2.3
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in

Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>

<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"

<!-- Because this Realm is here, an instance will be shared globally -->

<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>

<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<Realm className="org.apache.catalina.realm.MemoryRealm" />

<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->

<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />

<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
connectionURL="jdbc racle:thin:@ntserver:1521 RCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />

<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
connectionURL="jdbc dbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />

<!-- Define the default virtual host -->
<Host name="mysgflow" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">

<!-- <Context path="" docBase="sgflow" debug="0"
reloadable="true" crossContext="true">
</Context> -->

<Context path="" docBase="fixgui" debug="0"
reloadable="true" crossContext="true">

<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across *all* web applications contained
in this virtual host. -->
<Valve className="org.apache.catalina.authenticator.SingleSignOn"

<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.

<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>

<!-- Logger shared by all Contexts related to this virtual host. By
default (when using FileLogger), log files are created in the "logs"
directory relative to $CATALINA_HOME. If you wish, you can specify
a different directory with the "directory" attribute. Specify either a
relative (to $CATALINA_HOME) or absolute path to the desired
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"

<!-- Define properties for each web application. This is only needed
if you want to set non-default properties, or have web application
document roots in places other than the virtual host's appBase
directory. -->

<!-- Tomcat Root Context -->
<Context path="" docBase="ROOT" debug="0"/>

<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
<Ejb name="ejb/EmplRecord" type="Entity"

<!-- If you wanted the examples app to be able to edit the
user database, you would uncomment the following entry.
Of course, you would want to enable security on the
application as well, so this is not done by default!
The database object could be accessed like this:

Context initCtx = new InitialContext();
Context envCtx = (Context) initCtx.lookup("java:comp/env");
UserDatabase database =
(UserDatabase) envCtx.lookup("userDatabase");
<ResourceLink name="userDatabase" global="UserDatabase"

<!-- PersistentManager: Uncomment the section below to test Persistent

saveOnRestart: If true, all active sessions will be saved
to the Store when Catalina is shutdown, regardless of
other settings. All Sessions found in the Store will be
loaded on startup. Sessions past their expiration are
ignored in both cases.
maxActiveSessions: If 0 or greater, having too many active
sessions will result in some being swapped out. minIdleSwap
limits this. -1 means unlimited sessions are allowed.
0 means sessions will almost always be swapped out after
use - this will be noticeably slow for your users.
minIdleSwap: Sessions must be idle for at least this long
(in seconds) before they will be swapped out due to
maxActiveSessions. This avoids thrashing when the site is
highly active. -1 or 0 means there is no minimum - sessions
can be swapped out at any time.
maxIdleSwap: Sessions will be swapped out if idle for this
long (in seconds). If minIdleSwap is higher, then it will
override this. This isn't exact: it is checked periodically.
-1 means sessions won't be swapped out for this reason,
although they may be swapped out for maxActiveSessions.
If set to >= 0, guarantees that all sessions found in the
Store will be loaded on startup.
maxIdleBackup: Sessions will be backed up (saved to the Store,
but left in active memory) if idle for this long (in seconds),
and all sessions found in the Store will be loaded on startup.
If set to -1 sessions will not be backed up, 0 means they
should be backed up shortly after being used.

To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
and minIdleBackup all to -1, saveOnRestart to false, then restart
<Manager className="org.apache.catalina.session.PersistentManager"
<Store className="org.apache.catalina.session.FileStore"/>
<Environment name="maxExemptions" type="java.lang.Integer"
<Parameter name="" value="context.param.value"
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
<ResourceParams name="jdbc/EmployeeAppDb">
<value>jdbc:HypersonicSQL atabase</value></parameter>
<Resource name="mail/Session" auth="Container"
<ResourceParams name="mail/Session">
<ResourceLink name="linkToGlobalResource"




<!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with Tomcat 4.0
as its servlet container. Please read the README.txt file coming with
the WebApp Module distribution on how to build it.
(Or check out the "jakarta-tomcat-connectors/webapp" CVS repository)

To configure the Apache side, you must ensure that you have the
"ServerName" and "Port" directives defined in "httpd.conf". Then,
lines like these to the bottom of your "httpd.conf" file:

LoadModule webapp_module libexec/
WebAppConnection warpConnection warp localhost:8008
WebAppDeploy examples warpConnection /examples/

The next time you restart Apache (after restarting Tomcat, if needed)
the connection will be established, and all applications you make
visible via "WebAppDeploy" directives can be accessed through Apache.

<!-- Define an Apache-Connector Service -->
<Service name="Tomcat-Apache">

<Connector className="org.apache.catalina.connector.warp.WarpConnector"
port="8008" minProcessors="5" maxProcessors="75"
enableLookups="true" appBase="webapps"
acceptCount="10" debug="0"/>

<Engine className="org.apache.catalina.connector.warp.WarpEngine"
name="Apache" debug="0">

<Logger className="org.apache.catalina.logger.FileLogger"
prefix="apache_log." suffix=".txt"

<Realm className="org.apache.catalina.realm.MemoryRealm" />




******* End of server.xml ***********


# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:/ApacheServ/Apache2" will be interpreted by the
# server as "D:/ApacheServ/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.

### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.

# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:> ;
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "D:/ApacheServ/Apache2"

# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status

# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/

# Timeout: The number of seconds before receives and sends time out.
Timeout 300

# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On

# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100

# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15

## Server-Pool Size Regulation (MPM specific)

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0

# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (
Listen 80

# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/
LoadModule access_module modules/
LoadModule actions_module modules/
LoadModule alias_module modules/
LoadModule asis_module modules/
LoadModule auth_module modules/
#LoadModule auth_anon_module modules/
#LoadModule auth_dbm_module modules/
#LoadModule auth_digest_module modules/
LoadModule autoindex_module modules/
#LoadModule cern_meta_module modules/
LoadModule cgi_module modules/
#LoadModule dav_module modules/
#LoadModule dav_fs_module modules/
LoadModule dir_module modules/
LoadModule env_module modules/
#LoadModule expires_module modules/
#LoadModule file_cache_module modules/
#LoadModule headers_module modules/
LoadModule imap_module modules/
LoadModule include_module modules/
#LoadModule info_module modules/
LoadModule isapi_module modules/
LoadModule log_config_module modules/
LoadModule mime_module modules/
#LoadModule mime_magic_module modules/
#LoadModule proxy_module modules/
#LoadModule proxy_connect_module modules/
#LoadModule proxy_http_module modules/
#LoadModule proxy_ftp_module modules/
LoadModule negotiation_module modules/
#LoadModule rewrite_module modules/
LoadModule setenvif_module modules/
#LoadModule speling_module modules/
#LoadModule status_module modules/
#LoadModule unique_id_module modules/
LoadModule userdir_module modules/
#LoadModule usertrack_module modules/
#LoadModule vhost_alias_module modules/
#LoadModule ssl_module modules/

Include "d:/Apache/Tomcat/conf/auto/mod_jk.conf"

# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On

### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.

# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g.

# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.

# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off

# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "D:/Apache/Tomcat/webapps/fixgui"

# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None

# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.

# This should be changed to whatever you set DocumentRoot to.
<Directory "D:/Apache/Tomcat/webapps/fixgui">

# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# for more information.
Options Indexes FollowSymLinks

# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None

# Controls who can get stuff from this server.
Order allow,deny
Allow from all


# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"

# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# Order allow,deny
# Allow from all
# </Limit>
# Order deny,allow
# Deny from all
# </LimitExcept>

# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
#DirectoryIndex index.jsp index.html index.html.var

DirectoryIndex FIXLogin.jsp index.jsp index.html index.html.var

# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess

# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all

# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types

# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain

# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic

# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., (on) or (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off

# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
#EnableMMAP off

# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
#EnableSendfile off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log

# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn

# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common

# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent

# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined

# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full

# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On

# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "D:/ApacheServ/Apache2/icons/"

Alias /reports/ "D:/Temp/reports/"

Alias /servlet/ "D:/Apache/Tomcat/webapps/fixgui/WEB-INF/classes"

<Directory "D:/ApacheServ/Apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all

# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(? e|en|fr|ja|ko|ru))?(/.*)?$ "D:/ApacheServ/Apache2/manual$1"

<Directory "D:/ApacheServ/Apache2/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all

<Files *.html>
SetHandler type-map

SetEnvIf Request_URI ^/manual/de/ prefer-language=de
SetEnvIf Request_URI ^/manual/en/ prefer-language=en
SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr
SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja
SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko
SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru
RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2

# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "D:/ApacheServ/Apache2/cgi-bin/"

# "D:/ApacheServ/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "D:/ApacheServ/Apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all

# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo

# Directives controlling the display of server-generated directory listings.

# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort

# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif

# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html

# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress Z
#AddEncoding x-gzip gz tgz

# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru) - Croatian (hr)
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage he .he
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
AddLanguage hr .hr

# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw

# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback

# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
AddDefaultCharset ISO-8859-1

# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See for the
# official list of charset names and their respective RFCs.
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8

# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
# See
# for a list of sorts. But browsers support few.
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis

# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
AddType application/x-tar .tgz
AddType image/x-icon .ico

# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi

# For files that include their own HTTP headers:
#AddHandler send-as-is asis

# For server-parsed imagemap files:
#AddHandler imap-file map

# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var

# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml

# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location

# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/"
#ErrorDocument 402

# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"
# which allows you to create your own set of files by starting with the
# @exp_errordir@/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.

# Alias /error/ "@exp_errordir@/"
# <Directory "@exp_errordir@">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en cs de es fr it nl sv pt-br ro
# ForceLanguagePriority Prefer Fallback
# </Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully

# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the "" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from

# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the "" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from

# Bring in additional module-specific configurations
<IfModule mod_ssl.c>
Include conf/ssl.conf

### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at
# <URL:>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.

# Use name-based virtual hosting.
#NameVirtualHost *

# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin
# DocumentRoot /www/docs/
# ServerName
# ErrorLog logs/
# CustomLog logs/ common

JkMount /controller/* ajp13

JkWorkersFile D:/Apache/Tomcat/conf/jk/

JkLogFile D:/Apache/Tomcat/logs/mod_jk.log
JkLogLevel debug

Alias /fixui D:/Apache/Tomcat/webapps/fixgui

JkMount /servlet/* D:/Apache/Tomcat/webapps/fixgui/WEB-INF/classes
JkMount /*.jsp D:/Apache/Tomcat/webapps/fixgui/jsp

<location "/fixgui/web-inf/">
AllowOverride None
deny from all
Ulf Dittmer
Posts: 42966
  • 0
  • Mark post as helpful
  • send pies
  • Quote
  • Report post to moderator
You don't seriously expect anyone to work through that amount of configuration files, do you?
Craig Jackson
Ranch Hand
Posts: 405
  • 0
  • Mark post as helpful
  • send pies
  • Quote
  • Report post to moderator
I have a hard time understanding my own configuration files much less someone elses.

But, anyway.

If you access the controller using something similar to :

Then try adding the context-name to the httpd configuration file

instead of

[ November 15, 2005: Message edited by: Craig Jackson ]
[ November 15, 2005: Message edited by: Craig Jackson ]
It is sorta covered in the JavaRanch Style Guide.
  • Post Reply
  • Bookmark Topic Watch Topic
  • New Topic